Permanent Pacemaker

Permanent Pacemaker is a device used to regulate an abnormal heartbeat. The pacemaker is surgically implanted into the chest of the patient. By sending timed electrical signals to the heart, the pacemaker helps provide a regular, reliable heart rhythm. A special type of pacing, called biventricular His-Bundle pacing, is used to locate a blockage in the electrical system of the heart and determine if pacemaker implantation is needed. Small discs (electrodes) are placed on the skin in order to pick up electrical impulses from the heart and a catheter (thin tube) is inserted through an artery in the leg to the heart under X-ray guidance. The catheter is equipped with an electrode that measures electrical activity of the His-bundle. The His-bundle is a group of electrical fibers in the heart that generate electrical impulses that help the heart beat normally. When the heartbeat becomes erratic, it is referred to as an arrhythmia (an abnormal rhythm of the heart, which can cause the heart to pump less effectively).

Arrhythmias can cause problems with contractions of the heart chambers by:

• not allowing the chambers to fill with an adequate amount of blood because the electrical signal is causing the heart to pump too fast.
  
  

• not allowing a sufficient amount of blood to be pumped out to the body because the electrical signal is causing the heart to pump too slow or too irregularly.

The heart's electrical system:
The heart is, in the simplest terms, a pump made up of muscle tissue. Like all pumps, the heart requires a source of energy in order to function. The heart's pumping energy comes from an intrinsic electrical conduction system. 

How does the heart beat?
An electrical stimulus is generated by the sinus node (also called the sinoatrial node, or SA node), which is a small mass of specialized tissue located in the right atrium (right upper chamber) of the heart. The sinus node generates an electrical stimulus periodically (60-100 times per minute under normal conditions). This electrical stimulus travels down through the conduction pathways (similar to the way electricity flows through power lines from the power plant to your house) and causes the heart's chambers to contract and pump out blood. The right and left atria (the 2 upper chambers of the heart) are stimulated first and contract a short period of time before the right and left ventricles (the 2 lower chambers of the heart). The electrical impulse travels from the sinus node to the atrioventricular (AV) node, where it stops for a very short period, then continues down the conduction pathways via the bundle of His into the ventricles. The bundle of His divides into right and left pathways to provide electrical stimulation to both ventricles.  

Normally, as the electrical impulse moves through the heart, the heart contracts about 60 to 100 times a minute. Each contraction represents one heartbeat. The atria contract a fraction of a second before the ventricles so their blood empties into the ventricles before the ventricles contract. 

Under some conditions, almost all heart tissue is capable of starting a heartbeat, or becoming the pacemaker. An arrhythmia occurs when:

• the heart's natural pacemaker develops an abnormal rate or rhythm

• the normal conduction pathway is interrupted

• another part of the heart takes over as pacemaker

In any of these situations, the body may not receive enough blood because the heart cannot pump out an adequate amount with each beat as a result of the arrhythmia's effects on the heart rate. The effects on the body are often the same, however, whether the heartbeat is too fast, too slow, or too irregular. Some symptoms of arrhythmias include, but are not limited to:

• weakness

• fatigue

• palpitations

• low blood pressure

• dizziness

• fainting

The symptoms of arrhythmias may resemble other medical conditions. Consult your physician for a diagnosis.

What are the components of a permanent pacemaker/ICD?
A permanent pacemaker has two components:

• a pulse generator which has a sealed lithium battery and an electronic circuitry package. The pulse generator produces the electrical signals that make the heart beat. Many pulse generators also have the capability to receive and respond to signals that are sent by the heart itself.
  
  

• one or two wires (also called leads). Leads are insulated flexible wires that conduct electrical signals to the heart from the pulse generator. The leads may also relay signals from the heart to the pulse generator. One end of the lead is attached to the pulse generator and the electrode end of the lead is positioned in the atrium (the upper chamber of the heart) or in the ventricle (the lower chamber of the heart).

Older pacemakers sent out electrical signals at a constant rate, regardless of the heart's own rate. Pacemaker technology is now much more advanced. Today, pacemakers can "sense" when the heart's natural rate falls below the rate that has been  programmed into the pacemaker's circuitry.

Pacemaker leads may be positioned in the atrium or ventricle or both, depending on the condition requiring the pacemaker to be inserted. An atrial arrhythmia (an arrhythmia caused by a dysfunction of the sinus node or the development of another atrial pacemaker within the heart tissue that takes over the function of the sinus node) may be treated with an atrial permanent pacemaker whose lead wire is located in the atrium.

A ventricular arrhythmia (an arrhythmia caused by a dysfunction of the sinus node, an interruption in the conduction pathways, or the development of another pacemaker within the heart tissue that takes over the function of the sinus node) may be treated with a ventricular pacemaker whose lead wire is located in the ventricle. It is possible to have both atrial and ventricular arrhythmias, and there are pacemakers which have lead wires positioned in both the atrium and the ventricle. There may be one lead wire for each chamber, or one lead wire may be capable of sensing and pacing both chambers.

An ICD has a lead wire that is positioned in the ventricle, as it is used primarily for fast ventricular arrhythmias.

Pacemakers that pace either the right atrium or the right ventricle are called "single-chamber" pacemakers. Pacemakers that pace both the right atrium and right ventricle of the heart and require two pacing leads are called "dual-chamber" pacemakers.

How is a pacemaker/ICD implanted?
Pacemaker/ICD insertion is usually an outpatient procedure, done in the cardiac catheterization laboratory, or the electrophysiology laboratory. The patient is awake during the procedure, although sedation may be given to help the patient relax during the procedure. 

The picture right is a chest x-ray. The large, white space in the middle is the heart. The dark spaces on either side are the lungs. The small object in the upper corner is an implanted pacemaker.

A small incision is made just under the collarbone. The pacemaker/ICD lead(s) is inserted into the heart through a blood vessel which runs under the collarbone. Once the lead is in place, it is tested to make sure it is in the right place and is functional. The lead is then attached to the generator, which is placed just under the skin through the incision made earlier. Once the procedure has been completed, the patient goes through a recovery period of several hours and often is allowed to go home the day of the procedure.

There are certain instructions related to having an implanted permanent pacemaker or ICD. For example, after you receive your pacemaker or ICD, you will receive an identification card from the manufacturer that includes information about your specific model of pacemaker and the serial number. You should carry this card with you at all times so that the information is always available to any healthcare professional who may have reason to examine and/or treat you.